CONSTANT FACE DRIVER

• For turning between centres.
• Slip on driving discs – Quick changeover.
• Use revolving tailstock centre with pressure indicator as countercentre.
• Clamping diameter from 8 to 80mm.
• Turning diameter from 9 to 160mm.
• Three hydraulically equalised pistons.
• Long guided, spring loaded centre, axially adjustable.
• Morse taper mount – 3, 4, 5 & 6.

• Basic body for clamping in lathe chuck.
• Parallel shank – 25mm diameter.

CONSTANT FACE DRIVER

• Basic body, standard recess mount.
• Adaptor plates available as shown.
• Hydraulically equalised.
• Clamping diameter from 8 to 80mm.
• Slip on driving disc.

• Basic body, DIN55026 short taper with spring set.
• Mechanical equalisation.
• Available in size 5, 6 & 8 taper.
• Clamping diameter from 8 to 80mm.
• Slip on driving disc.

• Basic body – standard recess mount.
• Slip on driving discs.
• Cup spring set.
• Turning range 9 to 160mm.
• Clamping diameter 8 to 80mm.
• Hydraulically equalised.

• Adaptor plates for above basic body.
• Available in DIN 55026, 55027 & 55029 – Size 6, 8 & 11.

• Basic body – short taper mount.
• Cup spring set.
• Turning range 9 to 160mm.
• Clamping diameter 8 to 80mm.
• Mechanically equalised.
• Available in DIN 55026 – Size 5, 6 & 8.

CONSTANT FACE DRIVER
SLIP ON DRIVING DISCS

• Basic body
• Slip on driving discs.
• Right or left hand rotation.
• Driving discs are changed by easy plugging & unplugging action.
• Simple changing of drive discs to a different turning range allows large time saving advantages on production.
• Morse taper mounting – 3, 4, 5 & 6.
• Turning range 9 to 160mm.
• Clamping diameter 8-80mm.

• As above except with draw off nut.

• As above except with parallel shank & cup spring set.

• Centres available in 4, 6, 8, 10, 12 & 16mm diameters.

• Head type centres.
• Head diameters 21, 27, 40 & 56mm.

CONSTANT FACE DRIVER

• Basic body with bolt on driving head.
• Clamping of large and heavy workpieces, even with extremely uneven end faces.
• Each head has hydraulic pressure equalisation.
• Spring loaded, rigid centre, axially adjustable.
• Clamping diameter 63-160mm.
• Interchangeable driving pins.
• DIN adaptor plates sizes 6, 8 & 11.
• Available with sleeve and cup spring set.

• As above except with draw off nut & morse taper 5 & 6 mounting.

• Head and shaft in one piece.
• Hydraulically equalised.
• Right hand rotation only.
• Constant clamping diameter of 15, 22 & 35mm.
• Morse taper mount 2, 3 & 4.
• Turning range 16-30, 23-44 & 36-70.
• Centre tip 60°.

• Driving Pin – Length 30mm & 40mm.

• Driving Pin – Length 30mm & 40mm.

• Centres – 6, 9 & 16mm Diameter.

POWER-OPERATED FACE DRIVERS

• For turning, copying and transfer machines with automatic infeed.
• For machining unbalanced heavy workpieces that require substantial material removal, or irregular machining, such as square billets, forged components etc.
• (A) Available with slip on driving discs – Mechanically equalised.
• (B) Available with hydraulically equalised – exchangeable drive pins.
• Drivers pressed against workpiece by power operated cylinder.
• Wearing parts easily replaced.
• Hydraulic and pneumatic cylinders supplied to suit application.

• Basic body with short taper.
• High precision concentricity due to fixed centre point.
• Driving discs pressed against workpiece by power operated cylinder.
• Adjustable radial run-out on request.
• Adaptor plates to suit spindle nose mounting.

• M14 x 1,5 thread.

POWER-OPERATED DRIVING HEADS

• Hydraulically equalised.
• Four bolt on power operated face driver heads.
• Clamping diameters 63-80, or 83-100, or 108-125 or 143-160mm.
• Form H with tungsten carbide driving plates, useable on four sides.
• Driving pins can be changed for right or left hand rotation.
• Maximum equalising range of driving pins approx. 8mm.
• Nominal value for maximum loading approximately 4000daN.

POWER-OPERATED DRIVING HEADS

• Clamping diameter 63,00mm.
• Turning range 65-125mm.

Or

• Clamping diameter 75,00mm.
• Turning range 80-150mm.

Or

• Clamping diameter 80,00mm.
• Turning range 82-160mm.
• All right or left hand rotation.

• As above except clamping diameter 83,00mm.
• Turning range 85-165mm.

Or

• Clamping diameter 95,00mm.
• Turning range 100-190mm.

Or

• Clamping diameter 100,00mm.
• Turning range 102-200mm.

• As above except clamping diameter 108,00mm.
• Turning range 100-215mm.

Or

• Clamping diameter 120,00mm.
• Turning range 125-240mm.

Or

• Clamping diameter 125,00mm.
• Turning range 127-250mm.

• As above except clamping diameter 143,00mm.
• Turning range 145-285mm.

Or

• Clamping diameter 155,00mm.
• Turning range 160-310mm.

Or

• Clamping diameter 160,00mm.
• Turning range 160-320mm.

Associated Centre M20 x 1,5.

CONSTANT FACE DRIVERS – BOLT ON HEADS

• Driving head – interchangeable driving pins.
• Clamping diameter – 63 or 75 or 80mm.
• Turning range 65-125 or 80-150 or 82-160mm.
• Right and left hand rotation.

• As above except:-
• Clamping diameter 83 or 95 or 100mm.
• Turning range 85-165 or 100-190 or 102-200mm.
• Right and left hand rotation.

• As above except:-
• Clamping diameter 108 or 120 or 125mm.
• Turning range 110-215 or 125-240 or 127-250mm.
• Right and left hand rotation.

• As above except:-
• Clamping diameter 143 or 155 or 160mm.
• Turning range 145-285 or 160-310 or 162-320mm.
• Right and left hand rotation.

CONSTANT FACE DRIVER

• Basic body – 4 bolt on driving heads.
• Interchangeable driving pins.
• Hydraulically equalised.
• Spring loaded, rigid centre, axially adjustable.

Associated driving pins.

Centres 25mm & 32mm Diameter.

CENTRES & DRIVING DISCS FOR FACE DRIVERS

• Toothed driving disc.
• Clamping diameter 8,00mm.
• Turning range 9-16mm.
• Right, left, or right and left hand rotation.

As Above

• As above except clamping diameter 10,00mm.
• Turning range 11-20mm.

• Toothed driving disc.
• Clamping diameter 12,00mm.
• Turning range 13-24mm.
• Right, left, or right and left hand rotation.

• Toothed driving disc.
• Clamping diameter 16,00mm.
• Turning range 17-32mm.
• Right, left or right and left hand rotation.

• Toothed driving disc.
• Clamping diameter 20mm.
• Turning range 21-40mm.
• Right or left hand rotation.

• Toothed driving disc.
• Clamping diameter 25,00mm.
• Turning range 26-50mm.
• Right or left hand rotation.

As Above

• Toothed driving disc.
• Clamping diameter 32,00mm.
• Turning range 33-64mm.
• Right or left hand rotation.

• Driving discs with exchangeable hard metal driving plates.
• Clamping diameter 20,00mm.
• Turning range 21-40mm.
• Right, left, or right and left rotation.

• As above except clamping diameter 25,00mm.
• Turning range 26-50mm.

• As above except clamping diameter 32,00mm.
• Turning range 33-64mm.

• Driving discs with hard metal driving plates useable on four sides.
• Clamping diameter 40,00mm.
• Turning range 41-80mm.
• Right, left or right and left rotation.

As above

• As above except clamping diameter 50,00mm.
• Turning range 51-100mm.

As above

• As above except clamping diameter 63,00mm.
• Turning range 64-126mm.

As above

• As above except clamping diameter 80,00mm.
• Turning range 81-160mm.

CENTRES AND DRIVING DISCS

• Toothed driving discs.
• Clamping diameter 8,00mm.
• Turning range 9-16mm.
• Right, left or Right and left rotation.

As above

• As above except clamping diameter 10,00mm.
• Turning range 11-20mm.
• Right, left or right and left rotation.

• As above except clamping diameter 12,00mm.
• Turning range 13-24mm.
• Right, left, or right and left rotation.

• As above except clamping diameter 16,00mm.
• Turning range 17-32mm.
• Right, left, or right and left rotation.

• As above except clamping diameter 20,00mm.
• Turning range 21-40mm.
• Right and left hand rotation.

As above

• As above except clamping diameter 25,00mm.
• Turning range 26-50mm.
• Right hand and left hand rotation.

As above

• As above except clamping diameter 32,00mm.
• Turning range 33-64mm.
• Right hand and left hand rotation.

• Driving discs with hard metal driving plates useable on four sides.
• Clamping diameter 40,00mm.
• Turning range 41-80mm.
• Right, left, or right and left rotation.

As above

• As above except clamping diameter 50,00mm.
• Turning range 51-100mm.

As above

• As above except clamping diameter 63,00mm.
• Turning range 64-126mm.

As above

• As above except clamping diameter 80,00mm.
• Turning range 81-160mm.