Indexers & Rotary Tables

NC ROTARY TABLE

 

MR SERIES

 

MR120 – MR160 – MR200

 

Industry Standard Compact Rotary Table

  • Minimum size in its class.
  • Pneumatic spec.
  • Powerful pneumatic clamping torque by triple disk brake system.
  • High speed rotation.
  • High accuracy.
  • Rotary Joint built in as option.
  • Ideal for compact machining centres.

*CE correspondence.

SAMPLE APPLICATION

 

Various trunnion systems available.

 

Table with T-slot can also be offered.

 

Only Kitagawa can offer this combination of NC Rotary Table and chuck.

 

MR250 – MR320

 

Industry Standard Compact Rotary Table

  • Compact design.
  • Pneumatic spec.
  • Powerful pneumatic clamping torque by triple disk brake system.
  • High speed rotation.
  • High accuracy.
  • Rotary Joint built in as option.
  • Ideal for compact machining centres.

*CE correspondence.

 

 

SAMPLE APPLICATION

Specialist trunnion systems allow for multi surface or simultaneous machining.

 

HORIZONTAL/VERTICAL ROTARY TABLES

 

Features:-

  • Due to the three dividing plates, division into the required number of sections is obtained with an accuracy of 1’.
  • Dividing means of graduated drum with 1’30”.
  • Parallelism of clamping surface to base 0.02mm.
  • Flatness of clamping surface 0.02mm.
  • True run-out of tapered centre bore 0.01mm.
  • Squareness of clamping surface to angle face 0.02mm.
  • Centering morse taper sleeves are hardened and ground, extending machine life.
  • Possibility of worm wear compensation and worm disconnection from outside of the body.
  • Depending on the size gear ratio is 1:60, 1:90, 1:120.
  • High stiffness.

Standard accessories:

  • Three dividing plates with clamping bolts.
  • Slot nuts.
  • Table lever.

 

  • This tailstock is design for use with indexing fixtures, rotary tables and dividing heads.
ABCE H7FHKL
max
MORSE TAPERWEIGHT Kg
164681201826,0-44,0809524412.5
195801401833,0-63,010012129926.1
195901781839,0-69,012514631527.4
2501152131848,0-85,0160187366312.7
2751302531859,5-99,5200233420417.9
2801503031859,5-99,5250283420423.1

 

  • Height (H) is precisely adjusted by means of a screw and, after the adjustment, the spindle is locked in a vertical position.
  • These tailstocks are designed for use with indexing fixtures, rotary tables and dividing heads.
ABC
max
E H7F
min
F
max
H
min
H
max
KLMORSE TAPERWEIGHT Kg
19510018318407095130155335212.0
250120223185090130170200409318.8
280142253185090170200230433325.5
280142270185090200220250433328.7
3001643031860100220250285465443.0

 

HORIZONTAL/VERTICAL INDEXING FIXTURES

 

  • Please choose your desired chuck for use with Type 5901 from the table.
  • Simple and compact design provides for two types of indexing:
    1) basic indexing – which is done by means of catch device in 2, 3, 4, 6, 8, 12 and 24 divisions.
    2) angular indexing – which can be performed through sleeve with scale graduated in 360° in 1° increment.
    3) alternative indexing – which can be performed by means of catch device and specified changeable dividing plate (with Z = 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 or 24 units number of divisions). To obtain required number of divisions replace Z = 24 plate with one of the above specified plates.
  • Indexing accuracy 2’.
  • True run-out of tapered centre bore 0.02mm.
  • Squareness (base to chuck) 0.02mm.
  • Parallelism over face 0.02mm.
  • Concentricity of mounting flange with precision or standard chuck 0.03 ÷ 0.06mm.
  • Dividing plate made of high quality alloy steel, hardened and ground – extending machine life.
  • Body made of stabilized cast iron.

 

  • Please choose your desired chuck for use with Type 5911 from the table.
  • Simple and compact design provides for two types of indexing:
    1) basic indexing – which is done by means of catch device in 2, 3, 4, 6, 8, 12 and 24 divisions.
    2) angular indexing – which can be performed through sleeve with scale graduated in 360° in 1° increment.
    3) alternative indexing – which can be performed by means of catch device and specified changeable dividing plate (with Z = 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 or 24 units number of divisions). To obtain required number of divisions replace Z = 24 plate with one of the above specified plates.
  • Indexing accuracy 2’.
  • True run-out of tapered centre bore 0.02mm.
  • Squareness (base to chuck) 0.02mm.
  • Parallelism over face 0.02mm.
  • Concentricity of mounting flange with precision or standard chuck 0.03 ÷ 0.06mm.
  • Dividing plate made of high quality alloy steel, hardened and ground – extending machine life.
  • Body made of stabilized cast iron.