Jaw Clamping Inserts
CLAMPING INSERTS
- Clamping inserts are available in carbide or high speed steel in square or round design.
- When used for O.D. gripping soft jaws are machined to accommodate the inserts, thus eliminating the cost of heat treatment.
- When worn, only the inserts need replacing.
REPLACEMENT CLAMPING INSERTS
FOR JAW CLAMPING AND FIXTURES

CARBIDE TIPPED – ROUND INSERTS
INSERT CODE | A -0.13 | B -0.13 | C | F | E | THREAD |
---|---|---|---|---|---|---|
CG6 | 6 | 10 | 5 | - | - | M3 |
CG8 | 8 | 10 | 6 | 4.5 | 5 | M4 |
CG9 | 10 | 10 | 8 | 4.5 | 5 | M5 |
CG2A | 12.7 | 9.5 | 9.5 | 4.5 | 5 | M5 |
CG2B | 12.7 | 12.7 | 9.5 | 4.5 | 5 | M6 |
CG5A | 15.8 | 9.5 | 13 | 4.5 | 5 | M6 |
CG6A | 19 | 9.5 | 16 | 4.5 | 5 | M6 |
ADVANTAGES OF CARBIDE CLAMPING INSERTS
- Carbide gripping faces for long life.
- Cost reduction – just replace worn out inserts.
- Diamond point gripping serrations for positive grip.
- Soft top jaws become hard clamping jaws.
CARBIDE TIPPED – SQUARE INSERT
INSERT CODE | A +0.08 -0.13 | B | THREAD |
---|---|---|---|
CG7A | 12.7 | 9.5 | M6 |


HARDENED TOOL STEEL – ROUND INSERTS
INSERT CODE | A -0.13 | B -0.13 | F | E | THREAD |
---|---|---|---|---|---|
CG10 | 12 | 10 | 4.5 | 4.7 | M5 x 0.8 |
CG15 | 12 | 12 | 6 | 4.7 | M5 x 0.8 |
CG20 | 16 | 10 | 4.5 | 4.7 | M6 x 1 |
CG25 | 20 | 10 | 4.5 | 4.7 | M6 x 1 |
CG30 | 25 | 10 | 4.5 | 4.7 | M6 x 1 |
HARDENED TOOL STEEL – SQUARE INSERT
INSERT CODE | A -0.13 | B -0.13 | THREAD |
---|---|---|---|
CG40 | 12 | 10 | M5 x 0.8 |

HARDENED HIGH SPEED STEEL – O.D. GRIPPING
The gripper with the unique shape for O.D. gripping
- Top mounting of bolt.
- Pull-down effect by wedge shape design.
- Can be used for self-centering or swivelling.
- No hardening of jaws necessary.
- Head socket screw M4 x 12 DIN 912.
INSERT CODE | A | B |
---|---|---|
OD16 | 16 | 10 |
Parts included: Gripper with head socket screw M4 x 12 DIN 912
HARD CLAMPING INSERTS
Material: High Speed Steel (HSS)
- Higher Torque.
- Penetrates deeper into the hard skin of cast or forged parts.
- For clamping of high tensile materials.
- Only inserts need replacing.
INSERT CODE | ∅ A | B | THREAD | MAX. LOADING FORCE |
---|---|---|---|---|
CG6B | 6 | 10 | M3 | 1000 daN |
CG8B | 8 | 12 | M4 | 1000 daN |
CG10B | 10 | 14 | M5 | 1000 daN |
CG12B | 12 | 16 | M6 | 1000 daN |
CG13B | 12.7 | 16 | M6 | 1000 daN |
SWIVELLING GRIPPER & PAD INSERTS

INSERT CODE | A | B | C | D | THREAD |
---|---|---|---|---|---|
HT05 | 10 | 12 | 6 | 3.5 | M4 x 0.7 |
HT10 | 10 | 25 | 6 | 9 | M4 x 0.7 |
HT15 | 13 | 16 | 8.5 | 6.5 | M5 x 0.8 |
HT20 | 13 | 25 | 8.5 | 9 | M5 x 0.8 |
Self aligning gripper inserts that adjust to the workpiece draft angle or irregular surface giving secure workholding.
HARDENED TOOL STEEL PAD TYPES
INSERT CODE | A | B | C | D | THREAD |
---|---|---|---|---|---|
HP05 | 19 | 24 | 12 | 8.5 | M8 x 1.25 |
HP10 | 24 | 28 | 16 | 9 | M10 x 1.5 |
HP15 | 30 | 30 | 20 | 8.5 | M12 x 1.75 |
HP20 | 36 | 36 | 25 | 12 | M12 x 1.75 |